Electronic Stability Program (ESP)
DTC C1041 / C1042 / C1043 / C1044 / C1045 / C1046 / C1051 / C1052 / C1053 / C1054 / C1055 / C1056: Inlet Solenoid Circuit Failure, Outlet Solenoid Circuit Failure, Master Cylinder Cut Solenoid Circuit Failure, Low Pressure Solenoid Circuit Failure(DTC C1041 / C1045 / C1051 / C1055: Right-Front / Left Front / Right-Rear / Left-Rear Inlet Solenoid Circuit Failure)
(DTC C1042 / C1046 / C1052 / C1056: Right-Front / Left Front / Right-Rear / Left-Rear Outlet Solenoid Circuit Failure)
(DTC C1043 / C1044: Master Cylinder Cut Solenoid Circuit No. 1 / No. 2 Failure)
(DTC C1053 / C1054: Low Pressure Solenoid Circuit No. 1 / No. 2 Failure)
NOTE:
The DTC C1043, C1044, C1053 and C1054 are DTC only for ESP@
Wiring Diagram
Wiring Diagram:
DTC Detecting Condition
The ABS ESP (R) control module monitors the output from the valve. When the output of each valve exceeds the specified value compared with the signal sent from ABS ESP (R) control module, this DTC is set.
DTC Troubleshooting