Drive/Propeller Shafts, Bearings and Joints: Testing and Inspection

Propeller Shafts and Drive Shafts Inspection

Propeller Shafts Inspection
1. Check universal joint and spline of propeller shaft for rattle. If rattle is found, replace defective part with a new one.






2. Check propeller shaft (front and rear) flange yoke bolts for tightness, and retighten them as necessary.
Refer to Tightening Torque Specifications.

Drive Shafts Inspection
Check drive axle boots (wheel side and differential side) (1) for leaks, detachment, tear or other damage.
Replace boot as necessary.