Air Cleaner Assembly Removal and Installation
Air Cleaner Assembly Removal and InstallationRemoval
1) Disconnect negative cable from battery.
2) Disconnect MAF sensor connector (1) and remove MAF sensor (2).
3) Disconnect air cleaner outlet hose (3) from air cleaner assembly (4).
4) Remove air cleaner assembly.
Installation
Reverse removal procedure for installation noting the following.
^ Tighten MAF sensor bolt to specified torque.
Tightening torque
MAF sensor bolt: 3 Nm (0.3 kg-m, 2.5 lbf-ft)