Center Differential Assembly Disassembly and Reassembly
Center Differential Assembly Disassembly and ReassemblyDisassembly
1) Using spring pin remover (1) with 3 mm (0.1 in.) and hammer, drive out spring pin (2).
2) Disassemble center differential pinions (4) and pinion shaft (3) in center differential case (5).
Reassembly
Reverse disassembly procedure for Reassembly noting the followings.
^ Use new spring pin (1).
^ Using spring pin remover and hammer, drive in new spring pin (1) till the protrusion "a" from differential case (2) surface is 1.3 mm (0.051 in.).
