Engine: Specifications

Service Data and Specifications

General Specifications






Drive Belt






Exhaust Manifold and Three Way Catalyst Assembly

Unit: mm (in)






Spark Plug





*: Always check with the Parts Department for the latest parts information.

Cylinder Head

Unit: mm (in)






Valve

Valve Timing






Valve Dimensions

Unit: mm (in)






Valve Clearance

Unit: mm (in)






*: Approximately 80 °C (176 °F)

Available Valve Lifter





*: Always check with the Parts Department for the latest parts information.

Valve Spring






Valve Lifter

Unit: mm (in)






Valve Guide

Unit: mm (in)






Valve Seat

Unit: mm (in)






*1: Diameter made by intersection point of conic angles a1 and a2

*2: Diameter made by intersection point of conic angles a2 and a3

*3: Machining data

Valve Seal

Unit: mm (in)






Spark Plug Tube

Unit: mm (in)






Camshaft and Camshaft Bearing

Unit: mm (in)






*1: Cam wear limit

*2: Total indicator reading

Cylinder Block

Unit: mm (in)






Piston, Piston Ring and Piston Pin

Available Piston

Unit: mm (in)






*: Always check with the Parts Department for the latest parts information.

Piston Ring

Unit: mm (in)






Piston Pin

Unit: mm (in)






*: Always check with the Parts Department for the latest parts information.

Connecting Rod

Unit: mm (in)






1: Always check with the Parts Department for the latest parts information.

2: After installing in connecting rod

Crankshaft

Unit: mm (in)














*: Total indicator reading

Main Bearing

Unit: mm (in)






*: Always check with the Parts Department for the latest parts information.

Undersize

Unit: mm (in)






Bearing Oil Clearance

Unit: mm (in)






Connecting Rod Bearing





*: Always check with the Parts Department for the latest parts information.

Undersize

Unit: mm (in)






Bearing Oil Clearance

Unit: mm (in)