Fog/Driving Lamp: Service and Repair
Front Fog Lamp: Removal and Installation
Fog Lamp
Removal
NOTE:
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
1) Position front fender protector aside. Refer to [Front Fender Protector: Removal and Installation] Front Fender Protector Removal and Installation
2) Disconnect fog lamp connector.
3) Remove fog lamp screws and pull fog lamp rearward out of front bumper.
CAUTION:
- Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
- Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.
Installation
Installation is in the reverse order of removal.
NOTE:
After installation, perform front fog lamp aiming adjustment. Refer to [Front Fog Lamp: Aiming Adjustment] Adjustments.