Body Control Module: Testing and Inspection

Body Control System: Configuration (BCM)

Description

Vehicle specification needs to be written with SDT because it is not written after replacing BCM.

Configuration has three functions as follows:





CAUTION:

- When replacing BCM, you must perform "Select Saved Data List" or "After Replace ECU" with SDT.
- Complete the procedure of "Select Saved Data List" or "After Replace ECU" in order.
- If you set incorrect "Select Saved Data List" or "After Replace ECU", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "Select Saved Data List" or "After Replace ECU" except for new BCM.

Work Procedure

1. WRITING MODE SELECTION

SDT

Select "Reprogramming, Configuration" of BCM.

When writing saved data
GO TO 2.
When writing manually
GO TO 3.

2. PERFORM "SAVED DATA LIST"

SDT

Automatically "Operation Log Selection" window will display if "Before Replace ECU" was performed. Select applicable file from the "Save Data List" and press "Confirm".


Work End.

3. PERFORM "AFTER REPLACE ECU" OR "MANUAL CONFIGURATION"

SDT
1 Select "After Replace ECU" or "Manual Configuration".
2 Identify the correct model and configuration list. Refer to [Body Control System: Configuration (BCM)].
3 Confirm and/or change setting value for each item.

CAUTION:
Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.

4 Select "Next".

CAUTION:
Make sure to select "Next", confirm each setting value and press "OK" even if the indicated configuration of brand new BCM is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model can not be memorized.

5 When "Completed", select "End".


GO TO 4.

4. OPERATION CHECK

Confirm that each function controlled by BCM operates normally.


Work End.

Configuration List

CAUTION:

Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal control of ECU.





[=]: Items which confirm vehicle specifications