Self-Diagnosis Function (without SDT)

Self-Diagnosis Function (without SDT)

- The reading of these results is accomplished using one of two modes -"User mode" and "Diagnosis mode".
- After a malfunction is repaired, turn the ignition switch OFF for at least one second, then back ON. Diagnosis mode returns to the User mode. At that time, the self-diagnostic result is cleared.

How to Change Self-Diagnosis Mode





Diagnostic Procedure 4

Check SRS Repair History

1. CONSIDER POSSIBILITY THAT SELF-DIAGNOSTIC RESULT WAS NOT ERASED AFTER REPAIR

Check repair history of the SRS.

Have any previous repairs been made to the SRS?
YES
"DTC check" result (previously stored in the memory) might not be erased after repair. Perform DIAGNOSTIC PROCEDURE 3. Refer to "Self-Diagnosis Function (Without SDT)".
NO
Perform DIAGNOSTIC PROCEDURE 2. Refer to [SRS Operation Check] SRS Operation Check.