Evaporator Temperature Sensor / Switch: Service and Repair

Intake Sensor: Removal and Installation

Removal

1) Remove the lower dash side finisher. Refer to [Instrument Panel Assembly: Exploded View] Instrument Panel Assembly Exploded View.
2) Remove the assist grip handle. Refer to [Body Side Trim: Component] Body Side Trim Component.
3) Remove the front pillar upper finisher. Refer to [Body Side Trim: Removal and Installation] Body Side Trim Removal and Installation.
4) Remove the upper glove box (cluster lid E). Refer to [Instrument Panel Assembly: Exploded View] Instrument Panel Assembly Exploded View.
5) Disconnect the intake sensor electrical connector.






NOTE:
The intake sensor is located on the top of the heater and cooling unit assembly next to the A/C evaporator cover.

6) Twist the intake sensor to remove the intake sensor from the heater and cooling unit assembly.

Installation

Installation is in the reverse order of removal.