Cruise Test - Part 3

Road Test: Cruise Test - Part 3

1. CHECK SHIFT-DOWN

1 Confirm overdrive control switch is ON position.
2 Confirm gear shift selector is in "D" position.
3 Accelerate vehicle using half-throttle to D5.
4 Release accelerator pedal.
5 Set overdrive control switch to OFF position while driving in D5.
With SDT
Read the gear position.

Does A/T shift from D5 to D4 (O/D OFF)?
YES
GO TO 2.
NO
Record the malfunction, GO TO 2.

2. CHECK SHIFT-DOWN

During D4driving, move gear selector from D -> 3 -> 2 -> 1.

With SDT

Read the gear position.

Is downshifting correctly performed?
YES
GO TO 3.
NO
Record the malfunction, GO TO 3.

3. CHECK ENGINE BRAKE

Check engine brake.

Does engine braking effectively reduce speed in 11 position?
YES
1 Stop the vehicle.
2 Carry out "DTC check". Refer to [SDT Function (AT)] Scan Tool Testing and Procedures.
NO
Record the malfunction, then continue the trouble diagnosis.