SDM Fault
DTC B1013: SDM Fault
DTC Will be Set when
An internal SDM fault is detected by SDM.
NOTE:
DTC B1013 can not be cleared once it has been set.
DTC Troubleshooting
1) Turn ignition switch OFF.
2) Replace SDM.
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Repeat Air Bag Diagnostic System Check Air Bag Diagnostic System Check:Except Advanced Air Bag
to confirm that the trouble has been corrected.