B1386
DTC B1383 / B1386: Driver / Passenger Seat Belt Buckle Sensor Circuit Short to Ground
Wiring Diagram
Refer to B1381 DTC B1381 / B1384: Driver / Passenger Seat Belt Buckle Sensor Circuit Resistance High:Advanced Air Bag.
DTC Will be Set When
The voltage of seat belt buckle sensor circuit is below specified value for specified time.
Flow Test Description
Step 2: Check for short circuit between seat belt buckle sensor circuit and ground circuit.
Step 3: Check if malfunction is in seat belt buckle sensor.
DTC Troubleshooting
1.
Was "Air Bag Diagnostic System Check" performed?
YES -
Go to Step 2.
NO -
Go to Air Bag Diagnostic System Check Air Bag Diagnostic System Check:Advanced Air Bag.
2. Turn ignition switch OFF.
Disconnect SDM connector "L33" and seat belt buckle sensor connector "L58" or "L60".
Check proper connection to SDM connector at terminals "L33-9" and "L33-10" (for DTC B1383), or terminals "L33-11" and "L33-12" (for DTC B1386).
Check proper connection to seat belt buckle sensor connector at terminals "L58-1" and "L58-2" or "L60-1" and "L60-2".
If OK, then measure resistance between "L33-9" terminal and body ground, "L33-10" terminal and body ground (for DTC B1383), or between "L33-11" terminal and body ground, "L33-12" terminal and body ground (for DTC B1386).
Special Tool
(A): 09932-76010
Is each measured resistance infinity?
YES -
Go to Step 3.
NO -
For DTC B1383: "RED/BLU" circuit or "RED/BLK" circuit shorted to ground.
For DTC B1386: "WHT/BLU" circuit or "WHT/BLK" circuit shorted to ground.
3. Check seat belt buckle sensor. Inspection
Is it in good condition?
YES -
Substitute a known-good SDM and recheck.
NO -
Replace seat belt buckle sensor referring to Removal and Installation Front Seat Belt Removal and Installation. If DTC still exists, substitute a known-good SDM and recheck.
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components, ensure all components are properly mounted.
- Clear DTCs, if any. DTC Clearance
- Repeat Air Bag Diagnostic System Check Air Bag Diagnostic System Check:Advanced Air Bag
to confirm that the trouble has been corrected.