DTC 14

DTC No. 13 / No. 14: Release Signal Error from Steering Lock Unit / Steering Lock Unit Malfunction

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

1) Clear DTC referring to DTC Clearance DTC Clearance.
2) Turn ignition knob switch pushing ignition knob switch.
3) Check DTC referring to DTC Check DTC Check.

Troubleshooting

Replace steering lock unit and recheck.

NOTE:

Be sure to register the following code when a used keyless start control module is installed. Otherwise DTC No.13 is detected by keyless start control module though steering lock unit is normal.

- With immobilizer control system, ignition key transponder code is not registered in ECM.
- Without immobilizer control system, steering lock unit ID code is not registered in keyless start control module.