Antenna: Service and Repair

Antenna Base Removal and Installation

Removal

1) Remove antenna (1) from antenna base (2).
2) Remove head lining referring to Service and Repair Head Lining Removal and Installation.
3) Disconnect antenna feeder from antenna base (2).
4) Remove antenna base (2) from vehicle.

Installation

Reverse removal procedure noting the following.

- Tighten antenna base mounting nut to specified torque.

Tightening torque
Antenna base mounting nut (a): 5 Nm (0.5 kgf-m, 4.0 lbf-ft)