Sun Roof Assembly Removal and Installation

Sun Roof Assembly Removal and Installation

Sun Roof Assembly Components

Removal

1) Remove head lining referring to Service and Repair Head Lining Removal and Installation.
2) Remove sun roof glass referring to Sun Roof Glass Removal and Installation Sun Roof Glass Removal and Installation.
3) Disconnect drain hoses (1) connected to sun roof assembly at 4 locations.





4) Disconnect sun roof motor (1) at coupler (2).





5) Remove 8 nuts (1) and 4 bolts (2), then remove sun roof assembly (3).






Installation

For installation, reverse removal procedure, noting the following points.

- Connect drain hoses (1) to sun roof assembly at 4 locations. Clamp drain hose by each clamp securely.
- Pass rear drain hose between rib of outlet ventilator (2).





- Initialize sun roof position data referring to "How to reactivate the system to prevent being pinched by the sunroof" in Sunroof section of Owner's manual.
- After reinstalling sun roof assembly, be sure to make glass adjustment. (Refer to Adjustments Sun Roof Glass Adjustment.)