Headlight Auto Leveling Control Module Removal and Installation (If Equipped)

Headlight Auto Leveling Control Module Removal and Installation (If Equipped)

Removal

1) Disconnect negative (-) cable at battery.
2) Disconnect connector (1) from headlight auto leveling control module (2).
3) Remove headlight auto leveling control module with its bracket from heater unit (3).






Installation

For installation, reverse removal procedure noting the following.

- Connect connector securely.
- After replacing headlight auto leveling control module with new one, initialize headlight auto leveling system referring to Programming and Relearning Initialization of Headlight Auto Leveling System.