EVAP Canister Inspection

EVAP Canister Inspection

EVAP Canister Removal and Installation

WARNING:

If you suck at the nozzle on the EVAP canister by mistake, you will inhale harmful fuel vapor that may be present inside the canister.

Never suck at any of the nozzles on the EVAP canister.

EVAP-Leak-Check Model

When air is blown into tank pipe port (1), air should flow with no resistance through purge pipe port (2) and EVAP leak check module port (3).

If any abnormality is found, replace EVAP canister.





Non-EVAP-Leak-Check Model

1) Check outside of EVAP canister visually.
2) Disconnect vacuum hoses from EVAP canister.
3) Check that there is no restriction of flow through purge pipe (1) and air pipe (2) when air is blown (4) into tank pipe (3).

If any faulty condition is found in this inspection, replace EVAP canister.