Rear Suspension

Lower Arm / Bushing Disassembly and Reassembly

Disassembly

Lower Arm Removal and Installation
1) Push out suspension lateral link bushing by using hydraulic press (1) and special tool.
Special Tool

(A): 09913-84510






Reassembly

1) Press-fit suspension lateral link bushing (2) by using press (1) and special tool.

NOTE:
Any removed bushing will not fit properly if you reuse it.

Always use a new bushing.

Special Tool

(A): 09913-85210





2) Press-fit bushing (1) so that dimension "A" and "B" in figure become equal.