Removal and Replacement

A/T Fluid Change

1) Lift up vehicle.
2) When engine is cool, remove drain plug (1) from oil pan and drain A/T fluid.
3) Install drain plug with new gasket.

Tightening torque
A/T fluid drain plug (a): 20 Nm (2.0 kgf-m, 14.5 lbf-ft)





4) Lower vehicle and fill proper amount of specified fluid.
5) Check fluid level referring to "At Normal Operating Temperature" under Procedures A/T Fluid Level Check.

A/T fluid specification
: SUZUKI ATF 3317 or Mobil ATF 3309

A/T fluid capacity reference value
When draining from drain plug hole: Approx. 2.5 liters (5.33/4.40 US/Imp. pt.)
When overhauling: Approx. 7.2 liters (15.36/12.67 US/Imp. pt.)