B1014

DTC B1014: "AIR BAG" Warning Light Circuit Failure

Wiring Diagram

Refer to AIR BAG Warning Light Comes ON Steady "AIR BAG" Warning Light Comes ON Steady:Advanced Air Bag.

DTC Will be Set when

The voltage at the "AIR BAG" warning light circuit terminal "G46-7" does not match the commanded state of the warning light driver for specified time.

Flow Test Description

Step 2: Air bag warning light check

DTC Troubleshooting

1.
Was "Air Bag Diagnostic System Check" performed?
YES -
Go to Step 2.
NO -
Go to Air Bag Diagnostic System Check Air Bag Diagnostic System Check:Advanced Air Bag.

2.
In "Air Bag Diagnostic System Check Flow", was air bag warning light operation in good condition?
YES -
Substitute a known good SDM and recheck.
NO -
Go to applicable symptom diagnosis check flow referring to AIR BAG Warning Light Comes ON Steady "AIR BAG" Warning Light Comes ON Steady:Advanced Air Bag or AIR BAG Warning Light Does Not Come ON "AIR BAG" Warning Light Does Not Come ON:Advanced Air Bag.

NOTE:

Upon completion of inspection and repair work, perform the following items.

- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs, if any. DTC Clearance
- Repeat Air Bag Diagnostic System Check Air Bag Diagnostic System Check:Advanced Air Bag
to confirm that the trouble has been corrected.