Speedometer - Cable Service
TSB No. TS 7-02 03071Section Title: Miscellaneous
Division: Automotive
Category: Technical
SUBJECT:
ROUTING OF SPEEDOMETER CABLE
MODEL: SWIFT
YEAR: ALL
CONDITION:
Broken speedometer cable.
CAUSE:
Improper routing of cable.
CORRECTION:
Follow procedure outlined below.
Caution:
Improper routing of speedometer cable can cause premature cable breakage. To avoid damage be sure there is no sharp cable bend. For proper installation follow the procedures below.
SPEEDOMETER CABLE REMOVAL PROCEDURE
1. Disconnect negative battery cable from battery.
2. Remove steering column cover (1)
3. Remove steering column nuts (1)
4. Remove cluster panel (1) and disconnect rear defogger switch wiring coupler (green).
5. Place cluster panel on steering wheel as shown.
6. Disconnect wiring couplers(1) and speedometer cable (2) from speedometer assembly.
When disconnecting speedometer cable end from speedometer, press lever (3) to release cable from speedometer.
7. Detach speedometer cable from transmission and remove speedometer cable from the vehicle.
SPEEDOMETER CABLE INSTALLATION PROCEDURE
Perform the installation procedures in the reverse order of removal. For proper cable routing refer to illustration.