Shift Lever Switch Check ("A" Tests)

1. Turn OFF ignition switch.
2. Disconnect couplers from transmission control module.
3. For each check, bring tester probes in touch with coupler terminals from harness side.

A-1 Test (Part 1 Of 2):

A-1 Test (Part 2 Of 2):

A-1 Check Procedure







A-2 Check Procedure







A-3 Check Procedure







A-4 Check Procedure







N-P Check Procedure





Separately from the above inspection, shift lever switch itself can be checked on continuity in each shift position. Refer to the above table for connection and lead wire color.