Ignition Cable: Service and Repair

1. Remove high-tension cord at ignition coil while gripping its cap.
2. Remove distributor cap installed with high-tension cords.
3. Remove high-tension cord clamp from cylinder head cover.





4. Pull out high-tension cords from spark plugs while gripping each cap.

CAUTION:
- Removal of high tension cords together with clamps will be recommended so as not to damage their inside wire (resistive conductor).
- For the same reason, pull out each connection by gripping cap portion.

5. Installation is in the reverse order of removal.

CAUTION:
- Never attempt to use metal conductor high-tension cords as replacement parts.
- Insert each cap portion fully when installing high-tension cords.