Chart F - Air Bag Warning Lamp Cannot Indicate DTC By Flashing

CAUTION:
- When measurements are requested in this chart use specified digital multimeter with correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is requested refer to "INTERMITTENTS AND POOR CONNECTIONS".
Intermittents and Poor Connections

- When an open in air bag wire harness, damaged wire harness, connector or terminal is found, replace wire harness, connectors and terminals as an assembly.

Wiring Diagram:

1. To "AIR BAG" warning lamp
2. "AIR BAG" monitor coupler
3. SDM
G2: Diag. switch terminal
G3: Ground terminal

Diagnostic Chart:

CHART TEST DESCRIPTION: Number(s) below refer to circled number(s) on the diagnostic chart.
1. The "AIR BAG" warning lamp should flash 6 times after ignition is first turned "ON".
2. This test checks for an open in CKT "V".
3. This test checks for an open in CKT "B".