Tech-1 Diagnostics

The Tech-1 (scan tool) is used for following purposes.
- To read current and history diagnostic trouble codes.
- To clear all diagnostic trouble codes after a repair is completed.
- To read "voltage of ignition power" and "driver and passenger side resistance" recognized by SDM when the output command by using Tech-1 was inputted.

NOTE:
- The Tech-1 must be updated to communicate with the air bag system through a replaceable cartridge before it can be used for air bag system diagnostics.
- To use the Tech-1, change cartridge first, then connect it to the data link connector and turn the ignition switch "ON."

- Refer to the Tech-1 Operator's Manual for specific information on how to use the Tech-1.





Special Tool
A: 09931-76011 (Tech-1, scan tool)
B: 09932-66020-001 Tech-1 cartridge for air bag (with English Manual)
C: 09931-76030 16/14 pin DLC cable
D: 09931-76040 14/26 pin DLC cable (use this cable if 14/26 pin DLC cable is not available)