Antilock Brake System

2WD Vehicle








4WD Vehicle

DESCRIPTION
2WD Vehicle
2WD vehicle is not equipped with a G sensor. When an ABS control module for 4WD vehicle is installed to the 2WD vehicle, this DTC is set as G sensor signal is not inputted.

4WD Vehicle
While a 4WD vehicle is at stop or running, if the potential difference between the sensor signal terminal "B2" and the sensor ground terminal "B3" is not within the specified voltage value, or if the signal voltage while at a stop does not vary from that while running, this DTC is set.
Therefore, this DTC may be set when a 4WD vehicle is lifted up and its wheel(s) is turned. In such case, clear the DTC and check again.