Using "Air Bag" Monitor Coupler

DTC CLEARANCE USING "AIR BAG" MONITOR COUPLER (FOR SDM WITH ON-BOARD DIAGNOSTIC FUNCTION)
1) Turn "ON" ignition switch and wait about 20 seconds.
2) Using a service wire, repeat shorting and opening between diag. switch terminal and ground terminal on "AIR BAG" monitor coupler 5 at about 1 second intervals.
3) Perform "DTC check" and confirm that normal DTC (DTC 12) is displayed and not malfunction DTC.

NOTE: If DTC 51 or DTC 71 is stored in SDM, it is not possible to clear DTC.