Troubleshooting

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

SYSTEMATIC TROUBLE SHOOTING
Before performing troubleshooting for mechanical function described in the flow charts, make sure to check each of the following:

1. Engine coolant temperature is at normal operating temperature.
2. Engine idle speed is within specification.
3. Transmission fluid level is between FULL HOT and LOW HOT on oil level gauge at normal operating temperature of transmission fluid.
4. Accelerator cable, oil pressure control cable and select cable are adjusted properly.
5. Electric circuit of gear shift control system is free from break, coupler disconnection and poor contact.