Speedometer Drive With Automatic Transaxle

VEHICLE SPEED SENSOR (VSS, SPEEDOMETER DRIVEN GEAR)


REMOVAL





1. Disconnect negative cable at battery.
2. Disconnect Vehicle Speed Sensor (VSS) coupler.





3. Remove VSS.

INSTALLATION





1. Check O-ring and VSS surface for their flawlessness, apply oil to O-ring and driven gear and then install Vehicle Speed Sensor (VSS) to transmission.

Tightening Torque (a): 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)





2. Connect VSS coupler.
3. Connect negative cable at battery.