Mirrors: Testing and Inspection

POWER MIRROR CONTROL SYSTEM (If equipped)
The power mirror control system consists of the power mirror control switch, mirror actuator and related wiring harness.

WIRING CIRCUIT
Refer to "POWER MIRROR".





TROUBLE DIAGNOSIS

INSPECTION








Mirror Switch
1) Take out mirror switch from instrument panel.
2) Check continuity at each switch position by using a circuit tester. If any continuity is not obtained, replace mirror switch.

Door Mirror





1) Remove garnish and screws from door.
2) Remove door mirror from door by disconnecting coupler.





3) With couplers connected, check that door mirror operates properly when battery voltage is applied to connector terminals. If faulty is found, correct or replace.

NOTE: When installing door mirror to door, be careful not to pinch harness between door and door mirror.