Transmission Speed Sensor: Service and Repair

FORWARD CLUTCH CYLINDER REVOLUTION SENSOR


INSPECTION





1. Disconnect negative cable at battery.
2. Disconnect forward clutch cylinder revolution sensor coupler.
3. Check resistance between forward clutch cylinder revolution sensor terminals.

Forward clutch cylinder revolution sensor standard resistance: 387 - 473 ohms at 20° C (68° F)

REMOVAL





1. Disconnect negative cable at battery.
2. Disconnect forward clutch cylinder revolution sensor coupler.
3. Remove forward clutch cylinder revolution sensor by removing its bolt.

INSTALLATION





1. Apply A/T fluid to forward clutch cylinder revolution sensor O-ring.
2. Install forward clutch cylinder revolution sensor to A/T case and tighten bolt to specified torque.

Tightening Torque (a): 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)

3. Connect forward clutch cylinder revolution sensor coupler to forward clutch cylinder revolution sensor.
4. Connect negative cable to battery.