Headlamp: Service and Repair

INSPECTION





Circuit Continuity
1) Check lighting and dimmer switches for each terminal-to-terminal continuity.
2) Headlight is grounded at left panel and junction/fuse block.

REMOVAL





Type-1
1) Disconnect negative (-) cable at battery.
2) Disconnect harnessfrom bulb.
3) Remove headlight mounting screws.
4) Remove headlight.





Type-2
1) Disconnect negative (-) cable at battery.
2) Disconnect harness from shield beam.
3) Remove headlight bazel.
4) Remove headlight housing from body.
5) Remove retainer, shield, spring and mounting ring.

INSTALLATION
Reverse removal procedure of removal.