Piston Ring: Description and Operation

The piston is cast aluminum alloy, and has two compression rings and one oil ring.

Among two compression rings (top and 2nd rings), the outer surface of the top ring is treated with Striding for improvement in abrasion resistance.

The oil ring consists of two rails and one spacer. The piston pin is offset 0.5 mm towards the major thrust side.

This allows a gradual change in thrust pressure against the cylinder wall as the piston travels its path.

Pins, made of chromium steel, have a floating fitting the pistons and in the connecting rods. The connecting rods are made of forged steel, and the rod bearings are of precision insert type.