With Manufacturers Scan Tool

TECH-1 (SCAN TOOL) DIAGNOSTICS
- The Tech-1 (a scan tool) is used to read current and history diagnostic trouble codes and to clear all diagnostic trouble codes after a repair is completed.

NOTE:
- The Tech-1 must be updated to communicate with the air bag system through a replaceable cartridge before it can be used for air bag system diagnostics. To use the Tech-1 change cartridge first, then connect it to the data link connector and turn the ignition switch "ON".
- The Tech-1 reads serial data from the SDM "Serial Data" output terminal "A1" to the data link connector terminal.
- Refer to the Tech-1 Operator's Manual for specific information on how to use the Tech-1.

Special Tool
(A): Tech-1 (scan tool)
(B): Tech-1 cartridge for air bag
(C): 09931-76030 16/14 pin OBD-II adapter cable
(D): 09931-76040 14/26 pin DLC cable (Use this cable if 14/26 pin DLC cable is not available.)