Without Scan Tool

DTC CHECK USING "AIR BAG" WARNING LAMP
1. Turn ON ignition switch and wait till "AIR BAG" warning lamp has flashed 7 times.





2. By using service wire, connect diag. switch terminal of "AIR BAG" monitor coupler and body ground (or ground terminal of "AIR BAG" monitor coupler).
3. To read diagnostic trouble code, watch "AIR BAG" warning lamp. If diagnostic trouble code is not indicated, check diagnosis switch circuit according to Chart F.
Chart F - Air Bag Warning Lamp Cannot Indicate DTC By Flashing

NOTE:
- When there are 2 or more diagnostic trouble codes, all applicable code will be indicated from smaller number to large number in order.
- On-board diagnosis function is not possible to read history diagnostic trouble code or clear diagnostic trouble code.