Operation CHARM: Car repair manuals for everyone.

Front Wheel Speed Sensor

REMOVAL

NOTE: Front wheel speed sensor is serviceable only as an assembly.





1. Disconnect negative cable at battery.
2. Hoist vehicle and remove wheel.
3. Disconnect sensor coupler.
4. Remove front wheel speed sensor from steering knuckle.

INSTALLATION





1. Before installation, check the following:
^ Check O-ring for damage and deterioration. Replace if necessary.
^ Check to make sure that sensor tooth is free from any metal particles.





2. Install front wheel sensor to steering knuckle.
3. Tighten sensor bolt to specified torque.
Tightening Torque:
(a): 10 Nm (1.0 kg.m, 7.5 ft. lbs.)
4. Connect sensor coupler securely.
5. Tighten wheel nuts to specified torque and lower hoist.