Front

WHEEL DISC, NUT & BEARING
1. Inspect each wheel disc for dents, distortion and cracks. A disc in badly damaged condition must be replaced.





2. Check wheel nuts for tightness and, as necessary retighten them to specification.
Tightening Torque (a): 65 Nm (6.5 kg-m, 47.0 ft. lbs.)





3. Check wheel bearing for wear. When measuring thrust play, apply a dial gauge to wheel hub center after removing wheel center cap from wheel disc.
Thrust play limit: 0.4 mm (0.016 inch)
When measurement exceeds limit, replace bearing.





4. By rotating wheel actually, check wheel bearing for noise and smooth rotation. If defective, replace bearing.