P0117

Wiring Diagram:

CIRCUIT DESCRIPTION
Refer to ECT Sensor Operation.

Detecting Condition / Possible Cause:

DTC CONFIRMATION PROCEDURE
1. Clear DTC, start engine and keep it at idle for 1 min.
2. Select "DTC" mode on scan tool and check DTC.

NOTE:
- Before inspecting, be sure to check that coolant temp. meter in combination meter Indicates normal operating temperature (Engine is not overheating).
- When this DTC and P1705 are stored together, also clear DTC stored In TCM after completion of repair.

Inspection (Steps 1 - 3):