P0715

DTC P0715/DTC NO.37 INPUT SPEED SENSOR (FORWARD CLUTCH CYLINDER REVOLUTION SENSOR) CIRCUIT MALFUNCTION





WIRING DIAGRAM





DTC DETECTING CONDITION AND TROUBLE AREA





Connect oscilloscope between terminals E25-5 (+) and E25-17 (-) of TCM connector connected to TCIM and check forward clutch cylinder revolution sensor signal.

DTC CONFIRMATION PROCEDURE

WARNING:
- When performing road teat, "bet a place whore there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road teat should be carried out with 2 persons, a driver and a tester.

1. Turn ignition switch OFF.
2. Clear DTC stored in TCM and ECM.
3. Drive vehicle at 20 mph, 30 km/h or more for longer than 30 sec.
4. Stop vehicle.
5. Check DTC and pending DTC.





TROUBLESHOOTING (DTC P0715/DTC NO. 37)