P0753
DTC P0753/DTC NO.21 OR 22 SHIFT SOLENOID-A (#1, NO. 1) ELECTRICALDTC P0758/DTC NO.23 OR 24 SHIFT SOLENOID-B (#2, NO. 2) ELECTRICAL
WIRING DIAGRAM
DTC DETECTING CONDITION AND TROUBLE AREA
DTC CONFIRMATION PROCEDURE
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road teat should be carried out with 2 persons, a driver and a tester, on a level road.
1. Turn ignition switch OFF.
2. Clear DTC stored in TCM and ECM.
3. Start engine.
4. Shift select lever to "D" range and keep it for 10 seconds.
5. Increase vehicle speed to about 50 mph, 80 km/h or more.
6. Keep driving at above speed and at less than a half opening (at 3rd or4th gear in ED" range) for 10 sec. or longer.
7. Stop vehicle and check DTC and pending DTC.
TROUBLESHOOTING (DTC P0753/DTC NO. 21 OR 22, DTC P0758/DTC NO. 23 OR 24)