Additional Service Precautions

SERVICE PRECAUTIONS
The Sensing and Diagnostic Module (SDM) in air bag system can maintain sufficient voltage to cause a deployment of air bag for up to 10 seconds after the ignition switch is turned to the "LOCK" position, the battery is disconnected or the fuse powering the SUM is removed. Many of the service procedures require disconnection of the "AIR BAG-IO" fuse and air bag (inflator) modules (driver and passenger) from the deployment loop to avoid an accidental deployment. Diagnostic procedures do not normally require fuse removal or disconnection of air bag (inflator) modules.

WARNING: When performing service on or around air bag system components or air bag system wiring, follow the procedures listed to temporarily disable the air bag system. Refer to appropriate service manual procedures. Failure to follow procedures could result in possible air bag deployment, personal injury or unneeded air bag system repairs.