Crankshaft, Engine

Crankcase bolt with 10 mm thread diameter ((1) - (10)) 59 Nm (5.9 kgf-cm, 42.5 ft. lbs.)
Crankcase bolt with 8 mm thread diameter ((11) - (22)) 27 Nm (2.7 kgf-cm, 19.5 ft. lbs.)
Crankshaft Thrust Play
Standard 0.10 - 0.35 mm (0.0039 - 0.0138 inch)
Limit 0.42 mm (0.0149 inch)
Thickness of crankshaft thrust bearing
Standard 2.500 mm (0.984 inch)
Oversize: 0.125 mm (0.0049 inch) 2.563 mm (0.1009 inch)





Journal diameter
1 58.000 - 58.006 mm (2.2835 - 2.2837 inch)
2 57.994 - 58.000 mm (2.2832 - 2.2835 inch)
3 57.988 - 57.994 mm (2.2830 - 2.2832 inch)

Bore diameter for bearing cap No.1, No.2, No.3 and No.5 (without bearing)
A 61.994 - 62.000 mm (2.4407 - 2.4409 inch)
B 62.000 - 62.006 mm (2.4409 - 2.4412 inch)
C 62.006 - 62.012 mm (2.4412 - 2.4414 inch)