Shifter M/T: Service and Repair
Gear Shift Lever and Cable Removal and InstallationRemoval
1. Remove console box.
2. Disconnect gear shift and select control cables from gear shift control lever assembly.
3. Remove gear shift control cable guide nuts and gear shift lever assembly from body.
4. Disconnect shift and select cables from transaxle.
5. Remove E-rings, cable grommet and cable clamp, and then remove shift and select cables from body.
Installation
Reverse removal procedure for installation and note as follows.
^ Tighten each bolts and nuts to specified torque.
^ Apply grease to fuming or sliding portions.
: Grease 99000-25010