Driver Air Bag (Inflator) Module

WARNING:
- When handling an air bag (inflator) module, be sure to read "Precautions on Handling and Storage of Air Bag System Components" and observe each instruction. Failure to follow them could cause a damage to the air bag (inflator) module or result in personal injury.
- Never disassemble air bag (inflator) module or measure its resistance. Otherwise, personal injury may result.

CAUTION: If air bag (inflator) module was dropped from a height of 91.4 cm (3 ft) or more, it should be replaced.




Check air bag (inflator) module visually and if any of the following is found, replace it with a new one.
- Air bag being deployed
- Trim cover (pad surface) (1) being cracked
- Wire harness (2) or connector being damaged
- Air bag (inflator) module being damaged or having been exposed to strong impact (dropped)