Without Scan Tool

DTC Clearance




Not Using SUZUKI Scan Tool
1. Turn "ON" ignition switch and wait about 20 seconds.
2. Using a service wire (2), repeat shorting and opening between diag. switch terminal (3) and ground terminal (4) on "AIR BAG" monitor coupler (1)5 times at about 1 second intervals.
3. Perform "DTC Check"and confirm that normal DTC (DTC 12) is displayed and not malfunction DTC.

NOTE: If DTC 51 or DTC 71 is stored in SDM, it is not possible to clear DTC.