Transmission Position Sensor/Switch: Adjustments
Adjustment1. Disconnect select cable from manual shift lever.
2. Shift manual shift lever to "N" position.
3. Check that center line (1) on manual valve shaft and "N" reference line (2) on sensor are aligned. If not, align them according to following procedure.
4. Loosen transmission range sensor bolts.
5. Turn transmission range sensor gradually and align "N" reference line on sensor to center line on manual valve shaft.
6. With alignment made as above, tighten sensor bolts to specified torque.
Tightening torque
Transmission range sensor bolt (a): 20 Nm (2.0 kgf-m, 14.5 ft. lbs.)
7. Connect select cable to manual shift lever and adjust it.