Operation CHARM: Car repair manuals for everyone.

Fuel Injector On-Vehicle Inspection






Fuel Injector On-Vehicle Inspection

1) Remove engine cover referring to Engine Cover Removal and Installation.
2) Using sound scope (1) or such, check operating sound of injector when engine is running or cranking.

Cycle of operating sound should vary according to engine speed.

If no sound or an unusual sound is heard, check injector circuit (wire or coupler) or injector.





3) Disconnect coupler from injector, connect ohmmeter between terminals of injector and check resistance.

Resistance of injector
10.8 - 13.2 ohms at 20 °C, 68 °F

If resistance is out of specification, replace.





4) Connect coupler to injector securely.
5) Install engine cover referring to Engine Cover Removal and Installation.