Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Refrigerant Pressure SwitchRemoval
1. Disconnect negative cable at battery.
2. Disconnect A/C refrigerant pressure switch connector (1).
3. Remove A/C refrigerant pressure switch (2) from refrigerant pipe.
CAUTION: Be careful to distort refrigerant pipe.
Installation
Reverse removal procedure to install A/C refrigerant pressure switch noting the following instruction.
- Tighten A/C refrigerant pressure switch as specified torque.
Tightening Torque
A/C refrigerant pressure switch (a): 11 N.m (1.1 kg-m, 8.0 lb-ft)