System Specifications
Torque SpecificationsCylinder Head Bolts
a) Tighten all bolts to 53 Nm (5.3 kgf-m, 38.5 lb-ft) according to numerical order in figure.
b) In the same manner as in step a), retighten them to 84 Nm (8.4 kg-m, 61.0 lb-ft).
c) Loosen all bolts until tightening torque is reduced to 0 according to numerical order in figure.
d) Tighten all bolts to 53 Nm (5.3 kgf-m, 38.5 lb-ft) according to numerical order in figure.
e) In the same manner as in step b), retighten them to specified torque.
Tightening torque
Cylinder head bolts (a): 105 Nm (10.5 kgf-cm, 76.0 ft. lbs.)
Cylinder head bolt (hex hole bolt) (b): 11 Nm (1.1 kgf-cm, 8.0 lb-ft)
NOTE:
Be sure to tighten M6 bolt (3) after securing other bolts.