Rear

Rear Wheel Disc, Nut and Bearing Check





^ Inspect each wheel disc for dents, distortion and cracks.
A disc in badly damaged condition must be replaced.





^ Check wheel nuts for tightness and, as necessary, retighten to specification.
Tightening torque
Wheel nuts (a): 85 Nm (8.5 kgf-cm, 61.5 ft. lbs.)
^ Check wheel bearings for wear. When measuring thrust play, apply a dial gauge to spindle cap center. If thrust play exceeds limit, replace bearing.
Thrust play limit
"a": 0.1 mm (0.004 inch)





^ By rotating wheel actually, check wheel bearing for noise and smooth rotation. If it is defective, replace bearing.